sub3

What is the weight formula for aluminum?

Release time:

2023-08-11

Aluminum weight calculation formula: m=p*V (m is the mass, p is the density, V is the volume). The density of pure aluminum (p=2.7g/cm3) is relatively small, about 1/3 of iron, but the strength of pure aluminum is very low, and the annealing state ob value is about 8kgf/mm2, so it is not suitable for structural materials.

Aluminum is now commonly used as a metal material, and aluminum has a wide range of applications in daily life. The specific gravity of aluminum is 0.27 grams/cubic centimeter, much lighter than the specific gravity of iron, first of all, we must know the dimensions of the aluminum, and then calculate the volume, and finally the volume multiplied by the specific gravity is the weight.

 

 

Latest News

Introduction to the chemical properties of aluminum

2023-08-11

What is the weight formula for aluminum?

2023-08-11

Anti-corrosion process of aluminum foil

The main cause of corrosion is that the product is damp or exposed to water during the production process and distribution process. Therefore, controlling the production of corrosion waste is mainly to prevent aluminum foil from contacting water.

2023-06-13

What are the characteristics of aluminum foil?

Strong barrier property: It has extremely strong barrier property and can completely block all kinds of light (electromagnetic waves), air, moisture and bacteria, and can effectively prevent food from being damp, oxidized and deteriorated, and has an excellent fresh-keeping effect.

2023-04-12

Care and Maintenance of Aluminum Plates

Special attention should be paid to the selection of suitable detergents. A basic principle is: must use neutral detergents! Please do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide or sodium carbonate, strong acidic detergents, abrasive detergents and baking varnish soluble detergents.

2023-02-17

Processing technology of aluminum coil

Silicon has a corrosive effect on cemented carbide. Although aluminum alloys with more than 12% Si are generally called high-silicon aluminum alloys, it is recommended to use diamond tools, but this is not absolute, and the destructive power of the tools will gradually increase as the silicon content gradually increases. Therefore, some manufacturers recommend the use of diamond tools when the silicon content exceeds 8%.

2022-11-17